SAAB WIS ONLINE

Trionic control module

Trionic control module

To remove


Important

If a winding in the APC valve is short-circuited, the control module is probably also damaged and any new valves being fitted will be destroyed. Consequently, in case of a short circuit, the valve and the control module must both be changed at the same time.



1. Turn off the ignition.

2. Remove the glove box.

3. Fold back the carpet and remove the central locking system relay.


4. Unplug the connector and remove the control module.


To fit



1. Fit the control module.

2. Plug in the connector.

3. Fit the central locking system relay.


4. Refit the glove box.

5. Reset the immobilizer as follows:

• Connect Tech2 and turn the ignition ON.

• Select Body and TWICE.

• Select Immobilizer. After roughly 10 seconds, the immobilizer will have been programmed.