Checking the basic charging pressure (on the road)
| Checking the basic charging pressure (on the road) |
| Important | ||
|
The engine should be thoroughly warmed up. |
||
| 1. |
Position pressure gauge 83 93 514 vertically to reduce the risk of it giving incorrect readings.
|
|
| 2. |
Connect the pressure measuring equipment to the intake manifold.
|
|
| 3. |
Perform wide open throttle acceleration in 3rd gear at less than 1500 rpm. When engine speed approaches 3000 rpm, depress the brake pedal while keeping the accelerator fully depressed so that full load is obtained at 3000 rpm. Note the pressure gauge reading. If it is outside the tolerance limits, see
.
|
|
| 4. |
Remove the pressure measuring instrument and carry out adaptation of the boost pressure.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
