Panel lighting
| Panel lighting |
| 1. |
Remove the main unit. See
. Loosen the top and bottom covers on the main unit.
|
|
| 2. |
Unhook the 4 locking tabs (2 on each side) securing the front panel. If necessary, prise carefully with a screwdriver.
|
|
| Note | ||
|
When refitting, ensure that the connector under the front panel is correctly positioned. |
| To fit |
Fit the front panel onto the main unit and tighten the bottom/top covers, plug in the connectors and slide in the main unit.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
