Regulator with generator brushes
|
Regulator with generator brushes
|
The method is described with the generator removed.
1.
|
Remove the three bolts/nuts that hold the protective housing on the generator.
|
2.
|
Remove the two bolts that hold the regulator and then pull it up.
|
The generator brushes are mounted on the regulator and the unit is changed as a whole.
1.
|
Carefully straighten the spring tab so that it bears against the regulator.
|
2.
|
Clean and apply a thin layer of vaseline to prevent oxidation.
|
3.
|
Clean the ground connection of the regulator and apply vaseline.
|
5.
|
Fit the protective housing on the generator.
|