Direction indicators, front
|
Direction indicators, front
|
1.
|
Unscrew the screw holding the light cluster and pull the lamp forwards.
|
2.
|
Turn the lamp holder anti-clockwise and lift it out completely. For some markets there are two lampholders.
|
3.
|
Remove the light cluster.
|
1.
|
Insert the lamp and lampholder into the light cluster and turn it clockwise to fasten it.
Note
|
Be careful when fitting the light cluster so that the hook in the front edge and the guide in the rear edge are aligned with the headlamp.
|
|
2.
|
Position the light cluster correctly and screw it in place. Make sure the plate nut is in the correct position.
|