ABS warning lamp
Read the instructions below then start the fault diagnostic procedure.
Symptom: ABS warning lamp not working.
| ABS warning lamp |
Fault symptoms
ABS warning lamp not working.Diagnostic help
The ABS lamp can be turned on and off from the ABS control module using the activate command in the diagnostic tool.Check wiring harness.
Jiggle the wiring harness at several points and in different directions to reveal intermittent breaks and short-circuits in the leads. Observe the multimeter, test lamp or diagnostic instrument during the test.This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
