Electronic unit
Electronic unit |
1. |
Remove the main instrument unit, see
.
|
2. |
Remove the eight screws holding the cover in place. Note the positions of the four long and four short screws.
|
3. |
Release the holder (two clips) for the cover and remove the cover.
|
4. |
Unplug the connector and the contact foils.
|
5. |
Remove the electronic unit.
|
To fit |
1. |
Fit the electronic unit.
|
2. |
Plug in the foils and the connector.
|
3. |
Fit the electronic unit.
|
4. |
Fit the cover over the electronic unit, eight screws.
|
5. |
Fit the main instrument unit, see
.
|