B1361
Read the instructions below then
start the fault diagnostic procedure.
Symptom: SID unit buttons do not work.
SID Buttons. Malfunction
Fault symptoms
SID unit buttons do not work.
Conditions
Button on SID unit held down for more than 5 minutes.
Diagnostic help
The buttons on the SID unit can be read using a special Tech 2 command. Tech 2 shows which button is pressed in. A button may have stuck.
Check wiring harness.
Jiggle the wiring harness at several points and in different directions to reveal intermittent breaks and short-circuits in the leads. Observe the multimeter, test lamp or diagnostic instrument during the test.