B1605
Read the instructions below then start the fault diagnostic procedure.
Symptom: Certain functions or all functions stop working.
| B1605 |
Internal Fault
Fault symptoms
Certain functions or all functions stop working.Conditions
Internal components in control module are defective.Check wiring harness.
Jiggle the wiring harness at several points and in different directions to reveal intermittent breaks and short-circuits in the leads. Observe the multimeter, test lamp or diagnostic instrument during the test.This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
