Luggage compartment switch
Luggage compartment switch |
Note | ||
The luggage compartment switch is not stocked separately as a spare part. The complete lock must be replaced. |
1. |
Open the tailgate.
|
2. |
Remove the tailgate trim.
|
3. |
Loosen the pull rods from the lock (2 clips) and let them hang from the plastic joint and door handle respectively.
|
4. |
Remove the three screws holding the lock.
|
5. |
Take the lock out from the front.
|
To fit |
1. |
Put the lock back in position and tighten the 3 screws.
|
2. |
Attach the pull rods.
|
3. |
Fit the trim on the tailgate.
|