SAAB WIS ONLINE

Programming, Anti-theft protection

Programming, Anti-theft protection


The anti-theft protection function is controlled by TWICE, which is basically programmed by the control module supplier. However, this may not satisfy the requirements of all markets (countries) and some additional programming can therefore be necessary during manufacture, so-called “ Factory Programming ”.

When the car has been delivered to a market, it may be necessary to replace the TWICE control module or make other changes to the system. This calls for the possibility to carry out so-called “ After Market Programming ”.

Factory Programming

The following programming is done at the factory:


EOL programming (production)

Market programming (delivery service), see the table below:


EOL programming

The control module is programmed in the car so that it can be identified by and can communicate with the other control modules (systems) in the car, and can also be combine programmed for immobilization.

Market programming

A number of parameters for the anti-theft alarm function are preset to comply with the requirements of various markets (countries).

Important

Some settings are not allowed for certain markets.







Tech 2 commands

Alternatives

Market







EU

LA

US/CA

ME/AU/PA

JP

Sound level at arm/disarm

Low

High



High

High

High

High

High

Number of beeps at arming



0-7 beeps

0

0

0

0

0

Number of beeps at disarming



0-7 beeps

0

0

0

0

0

Number of beeps when opening tailgate

(Values in brackets apply to the Cabriolet)



0-7 beeps

0

(0)

0

(2)

0

(2)

0

(2)

0

(2)

Disarming at low battery voltage

No

Yes



No

No

No

No

No

Sound, activation time



0-520 s

30

30

30

30

30

Direction indicators, activation time



0-520 s

300

300

300

300

300

Self-arming

No

Yes



No

No

No

No

No

Self-arming time



0-2040 s

0

0

0

0

0



After Market Programming

The following programming can be done during “After Market Programming”:


Spare parts programming

Immobilization

Anti-theft alarm

Programming transponders and remote controls

Self-arming

Self-arming time


Spare parts programming

When the TWICE control module is replaced, the new module must be programmed in the car so that it will function correctly according to specification.

Immobilization

When the TWICE control module is replaced, the new module must be combine programmed with the Multi Instrument Unit (MIU) and the Engine Management System to ensure that the immobilization functions properly. Otherwise the engine will not start.

Anti-theft alarm

TWICE must be reprogrammed when fitting an anti-theft alarm, or adding an tilt sensor, or when the tilt sensor/glass breakage sensor is removed.

Programming transponders and remote controls

When replacing the TWICE control module, 2 transponders (car keys) and 2 remote controls are supplier with the new control module and they are pre-programmed to suit the new control module. If more than 2 transponders (car keys) and/or remote controls are required, e.g. the old units, they can be programmed to suit the new control module. The control module must be taught to recognise them. A maximum of 4 transponders (car keys) and 4 remote controls can be programmed and used simultaneously.

Self-arming

The self-arming function for the anti-theft alarm is not programmed during the delivery service (inactive). However, it can be programmed and made active and the arming time can be set as required.

Spare parts programming





Menu - Tech 2

Alternatives

1



TWICE





2



Programming





3



Spare parts programming





4



Market selection



EU, LA, US/CA, ME/AU/PA, JP

5



Select Alarm configuration





No alarm, Glass break, Glass break and Tilt sensor

Tilt sensor

6



Select steering wheel position

Left-hand drive (LHD)

Right-hand drive (RHD)



7



Configuration of rear seat heater



With, without

8



Configuration of Power operated seats



With, without

9



Body type



3D, 5D, Cabriolet

10



Engine type



Petrol (gasoline), Diesel



Anti-theft programming





Menu - Tech 2

Alternatives

1



TWICE





2



Programming





3



Anti-theft alarm installation

No alarm, Glass break, Glass break and Tilt sensor

Tilt sensor





Programming transponders and remote controls





Menu - Tech 2

Alternatives

1



TWICE





2



Programming





3



Learn transponders and remote controls







Self-arming





Menu - Tech 2

Alternatives

1



TWICE





2



Adjustment





3



Anti-theft alarm





4



Self-arming



No, Yes



Self-arming time





Menu - Tech 2

Alternatives

1



TWICE





2



Adjustment





3



Anti-theft alarm





4



Self-arming time



0-2040 secs



Immobilization





Menu - Tech 2

Alternatives

1



TWICE





2



Immobilization