Control module
| Control module |
| To remove |
| 1. |
Undo and lift out the left-hand front seat.
|
|
| 2. |
Detach and fold away the carpet. (3D: the belt guide must be detached first.)
|
|
| 3. |
Unplug the connector to the electronic control module.
|
|
| 4. |
Unscrew 1 nut and lift away the control module.
|
|
| To fit |
| 1. |
Fit the control module and screw it down.
|
|
| 2. |
Plug in the connector to the control module.
|
|
| 3. |
Replace the carpet. (3D: fit the belt guide.)
|
|
| 4. |
Refit the front seat.
|
|
| 5. |
After replacement of the TWICE control module, spare parts programming must be performed. Follow the instructions in the diagnostic tool menu "Programming".
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
