Washer fluid reservoir
Washer fluid reservoir |
1. |
Empty the reservoir.
|
2. |
Remove the filler pipe and the plastic nut.
|
3. |
Raise the car and remove the wing liner at the front (3 screws).
|
4. |
Remove the pump and the level sensor from the reservoir and let them hang by their respective hoses and leads.
|
5. |
Remove the 2 retaining screws from the reservoir and pull the washer fluid reservoir downwards.
|
Refitting |
1. |
Place the reservoir in its correct position and refit the retaining screws.
|
2. |
Refit the pump.
|
3. |
Refit the level sensor with its float pointing downwards.
|
4. |
Refit the wing liner at the front and lower the car.
|
5. |
Refit the plastic nut and the filler pipe.
|
6. |
Fill the reservoir with washer fluid.
|