Prepared towing installation
|
Prepared towing installation
|
A wiring harness is pre-fitted for the installation of a tow hook. An 8-pin connector 258 is provided under the LH rear light.
The following feeds pass through the connector:
Pin 1
|
Brake light (from brake-light switch 29 via fuse B)
|
Pin 2
|
RH parking light
|
Pin 3
|
LH direction indicators (from DICE)
|
Pin 4
|
RH direction indicators (from DICE)
|
Pin 5
|
Rear fog lights
|
Pin 6
|
LH parking light
|
Pin 7
|
--
|
Pin 8
|
Rear fog lights (for monitoring unit, from DICE)
|
Between pins 5 and 8 there is a jumper that must be removed if a "check unit" for rear fog lights is being fitted.
1.
|
Check the electric contacts at the electric connection of the trailer hitch which is at risk of oxidation.
|
2.
|
Check that there is a voltage on the relevant connection in the connector 258.
|
3.
|
Check fuses and wiring harnesses.
|