No.
|
Name
Location
|
Illustration
|
|
Components
|
|
22a
|
Main fuse box, dashboard
on end of dashboard by driver's door
|
|
36
|
Motor, ventilation fan
in middle between cabin wall and partition wall
|
|
38
|
Motor, air recirculation flap
on end of heater housing behind glove box
|
|
216
|
ACC control module
under radio
|
|
217
|
Temperature sensor, mixed air
on heater housing's front floor outlet duct to driver's side
|
|
218
|
Temperature sensor, cabin air
in centre console switch cavity
|
|
219
|
Suction fan, cabin air
integrated in cabin temperature sensor
|
|
220
|
Control device, ventilation fan
in cabin on end of evaporator to passenger side
|
|
221
|
Motor, air distribution damper
on heating and ventilation unit behind centre console
|
|
222
|
Motor, mixed-air damper
on end of heating and ventilation unit to passenger side behind centre console side panel
|
|
223
|
Solar sensor
centred above dashboard
|
|
581
|
Solenoid valve, heat exchanger
on front edge of heater housing
|
|
|
8-pin connector
|
|
H8-1
|
By ventilation fan control
|
|
|
10-pin connector
|
|
H10-5
|
On heater unit behind ACC panel
|
|
|
Crimp connections
|
|
J50
|
Approx. 270 mm from branching grounding point G34 towards SID
|
|
J59
|
LHD:
Approx. 40 mm from branching grounding point G33 towards main fuse box
RHD:
Approx. 130 mm from branching main fuse box towards main fuse box
|
|
J94
|
LHD:
--
RHD:
Approx. 220 mm from branching radio connectors towards connector bracket below left A-pillar
|
|
|
Grounding points
|
|
G33P
|
Grounding point, connector bracket (power)
below left-hand A-pillar
|
|
G34P
|
Grounding point, control module bracket (power)
below right-hand A-pillar
|
|