Transmission fluid temperature sensor
|
|
Transmission fluid temperature sensor
|
|
1.
|
Disconnect the temperature sensor's cable.
|
|
2.
|
Remove the two bolts securing the cover.
Note
|
Note
|
|
Fluid will run from the gearbox.
|
|
|
3.
|
Unscrew the fluid temperature sensor, plugging the hole to prevent fluid from running out.
|
|
1.
|
Screw the fluid temperature sensor in place.
Tightening torque: 25 Nm (18.5 lbf ft).
|
|
2.
|
Refit the cover and tighten the bolts.
Tightening torque: 25 Nm (18.5 lbf ft).
|
|
3.
|
Reconnect the fluid temperature sensor's cable.
|
Important
|
|
Check the fluid level after fitting.
|
|
|
|
