Checking the "stalling" speed
|
|
Checking the "stalling" speed
|
|
Important
|
|
This test must not be carried out for longer than 5 seconds! It is not recommended for turbo variants.
|
|
|
The test indicates the general condition of the engine and transmission by checking the max. engine speed in positions D and R.
Checking the "stalling" speed:
|
1.
|
Chock all four wheels on the car.
|
|
2.
|
Apply the handbrake fully.
|
|
3.
|
Press the brake pedal hard.
|
|
4.
|
Start the engine and move the selector lever to position D.
|
|
5.
|
Fully depress the accelerator and quickly read off the highest engine speed. The "stalling" speed should be:
B234i:
2300±150 rpm.
B204i:
2000±150 rpm.
B204l:
2325±150 rpm.
|
|
6.
|
Repeat the test with the selector lever in position R. Stalling speed should be the same as above.
|
