Checking the transmission fluid level
|
|
Checking the transmission fluid level
|
Checking and topping up the transmission fluid should be carried out in accordance with the service schedule.
The level of the fluid can be checked in the following manner:
|
1.
|
Place the car on an level surface and apply the handbrake. The gearbox should be at operating temperature (approx. +80°C), which will be reached after driving about 20 km, while checking the fluid level. Check the fluid temperature with the diagnostic tool.
|
|
2.
|
Run the engine at idling speed, engage position D and wait at least 15 seconds. Then engage R and wait 15 seconds. Do the same in position P.
|
|
3.
|
Wipe the dipstick clean with a lint-free cloth and put it back in the gearbox.
|
|
4.
|
The fluid level should be between the MIN and MAX markings on the side of the dipstick marked +80°C. If necessary, top up with Texaco Texamatic DEXRON III (7045 EU, TL1863 US) mineral based fluid through the dipstick pipe. The distance between the markings corresponds to approx. 0.4 litres.
|
|
5.
|
When the outdoor temperature is low (colder than ± 0°C), the operating temperature of +80°C will not be reached. In this case check the fluid level on the side of the dipstick marked + 20°C).
|
Important
|
|
Change the fluid if it has a burnt smell or is black.
|
|
|
|
