Bearing race, input shaft

/ 9-3 (9400) / 1998 / 4. Transmission / Manual gearbox / Adjustment/replacement / Bearing race, input shaft

Bearing race, input shaft

To remove

1.

Press out the bearing race with 87 91 204 Sleeve, bearing race using 87 92 236 Fitting speed gear, F35, support as a support.

To fit

1.

Seat the bearing race using a plastic hammer.

2.

Press on the bearing to the stop using 83 90 312 Drift, bearing race, input shaft . 83 90 114 Sleeve and 87 91 311 Sleeve, bearings driver shaft must be used.