Bushes for selector shafts, gearcase
Bushes for selector shafts, gearcase |
Important | ||
Bushes should be tapped out before the gearcase is washed as the detergent can destroy the surface of the bushes. |
||
1. |
Carefully use
87 91 238 Drift, bush selector rod
to tap out the three bushes in the gearcase and the bush for the selector shaft in the clutch housing.
|
To fit |
Important | ||
The reverse selector shaft has no bush in the gearcase. |
||
1. |
Tap in the bushes carefully using
87 91 238 Drift, bush selector rod
.
|