Selector lever
| Selector lever |
| To dismantle |
The selector lever must have been removed first.
| 1. |
Push down one of the springs and remove the circlip. Lift off and retain the spring and sleeve.
|
|
| 2. |
Remove the other spring and sleeve in the same way.
|
|
| To assemble |
| 1. |
Fit springs to selector lever.
|
||||||||||
| 2. |
Press down the spring and sleeve and fit a new circlip to the selector lever.
|
|
| 3. |
Fit the second spring and sleeve in the same way. Fit a new circlip.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
