Mating face
| Mating face |
Gearbox mating face
| 1. |
End cover
|
|
| 2. |
Gearcase
|
|
| 3. |
Clutch housing
|
|
The gearbox has only two pairs of mating faces. The mating faces between the clutch housing and the gearcase are sealed with sealant and the mating faces between the gearcase and the end cover are sealed with a gasket. Ventilation and breathing are via a "labyrinth" in the upper part of the gearcase which also houses a filter (sintered compact) to keep out dirt and moisture.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
