SAAB WIS ONLINE

Master cylinder

Master cylinder

To remove



1. Drain the brake fluid from the brake fluid reservoir. Use 88 19 096 Bleeding equipment .

2. Place a sheet of paper or a cloth under the master cylinder.

3. Disconnect the brake pipes and plug the connections.

4. Remove the two master cylinder retaining nuts and lift out the master cylinder.

5. Transfer the brake fluid reservoir to the new master cylinder.


To fit



1. Fit the master cylinder to the brake servo unit and tighten the retaining nuts

2. Connect the brake pipes. Remove the paper or cloth from under the master cylinder.

3. Fill with the brake fluid reservoir with brake fluid.

4. Bleed the brake system. See Bleeding the brake system .

5. Check the function by depressing the brake pedal. Check the tightness of the brake pipe connections as well.