SAAB WIS ONLINE

Vacuum pump, diesel engine

Vacuum pump, diesel engine

To remove



1. Disconnect the vacuum hose from the brake servo, and vacuum hose that is connected to the underside of the vacuum pump.

2. Remove the four retaining screws from the vacuum pump and carefully lift out the pump and adapter.

Important

Make note of the position of the pump.



To fit



1. Cleans the vacuum pump seals.

2. Fit a new gasket to the vacuum pump and refit the pump and adapter.

Important

The vacuum pump must be fitted in the same position as previously.


Tightening torque 8 Nm (6 lbf ft).

3. Connect the brake servo and vacuum pump vacuum hoses.

Tightening torque 18 Nm (13 lbf ft).

Connect the vacuum hose to the underside of the vacuum pump.