Steering wheel adjustment locking lever
Steering wheel adjustment locking lever |
To remove |
1. |
Remove the steering column covers.
|
2. |
Remove the lower dashboard panel.
|
3. |
LHD:
Remove the knee member.
|
4. |
Remove the nut and bolt from the locking lever.
|
To fit |
1. |
Lubricate the cam on the locking lever sparingly with grease.
|
2. |
Fit the locking lever, bolt and new lock nut.
|
3. |
Put the steering wheel in a central position.
|
4. |
Use a cable tie to fasten the
83 90 130 Dynamometer
to the locking lever.
|
5. |
Pull on the dynamometer and take a reading when the locking lever goes into locked position.
Repeat the measurement until a stable value is obtained. Reading: 40 N |
6. |
Tighten or loosen the bolts as necessary.
|
7. |
Repeat from step 5 if necessary.
|
8. |
LHD:
Fit the knee shield.
|
9. |
Fit the lower dashboard panel.
|
10. |
Fit the steering column covers.
|