B2866, B2867, B2868, B2869
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Airbag warning lamp on.
|
|
B2866, B2867, B2868, B2869
|
B2866
Side Airbag, Passenger. Short to Ground
B2867
Side Airbag, Passenger. Short to B+
B2868
Side Airbag, Passenger. Open Circuit
B2869
Side Airbag, Passenger. Resistance Too Low
Fault symptoms
Airbag warning lamp on.
Conditions
The following conditions are applicable to the respective diagnostic trouble codes:
B2866
|
•
|
The voltage applied to control module pin 2 is lower than 1.5 V for 1.25 s.
|
B2867
|
•
|
The voltage applied to control module pin 1 is higher than 3.5 V for 1.25 s.
|
B2868
|
•
|
The resistance measured by the control module is higher than 4.04 ohms for 10 s.
|
|
•
|
The resistance measured by the control module is higher than 225 ohms for 160 ms.
|
|
•
|
Fault diagnosis will not be carried out if diagnostic trouble code B2861 or B2862 has been generated.
|
B2869
|
•
|
The resistance measured by the control module is lower than 1.50 ohms for 20 s.
|
|
•
|
Fault diagnosis will not be carried out if diagnostic trouble code B2861 or B2862 has been generated.
|
