Stepping motor, air-mixing damper
| Stepping motor, air-mixing damper |
| Removing |
| 1. |
Remove the glove box. See 8:2 Interior equipment.
|
|
| 2. |
Remove the side panel from the centre console.
|
|
| 3. |
Remove the floor air duct.
|
|
| 4. |
Remove both retaining bolts from the stepping motor.
|
|
| 5. |
Unplug the connector.
|
|
| Fitting |
| 1. |
Plug in the connector.
|
|
| 2. |
Fit the stepping motor and tighten both retaining bolts.
|
|
| 3. |
Refit the floor air duct.
|
|
| 4. |
Refit the side panel on the centre console.
|
|
| 5. |
Refit the glove box. See 8:2 Interior equipment.
|
|
| 6. |
Calibrate the ACC-system by simultaneously pressing the buttons “AUTO” and “OFF”.
|
||||||||||
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
