SAAB WIS ONLINE

Increased user programming

Increased user programming




The ACC control module can also be programmed by the user so that certain automatic functions are changed. These are stored so that the control module selects these until they are cancelled. Programming as well as cancellation of selections is done by pressing ECON or electrically heated rear window for more than 1.2 seconds. In both cases, selections are acknowledged by the selected function symbol flashing 4 times and an explaining text is displayed on the SID for 5 seconds.

The increased functions are explained below:

ECON

This function is selected automatically when outside temperature is below 10˚C and solar intensity is lower than 351 W/m 2 and cuts out when temperature exceeds 13˚C or if solar intensity is greater than 351 W/m 2 .

Note

The ACC control module does not accept an increasing outside temperature if the travel speed is under 30 km/h.

Adjusting

The ACC unit can be programmed to select ECON at other temperatures using the diagnostics tool.

Electrically heated rear window and door mirrors

The engagement time depends on outside temperature.

At 5˚C, the time is less than 4 minutes. At lower temperatures, time increases to max. 10 minutes, which is used when outside temperatures are below -10˚C.

Note

Experience shows that half of all ACC control modules that claims were made for during the warranty period were free of defects but programmed by the user. It is therefore very important to explain the function to the customer.