Parking heater
Parking heater |
The parking heater applies B+ on the ACC-unit pin 3 when the parking heater is being started. When the ignition is turned off, the following selections will be made:
• |
The air-mixing dampers are automatically adjusted according to selected temperature.
|
• |
The air-mixing damper in the defroster position for 15 minutes, then in defrost/floor position.
|
• |
The recirculation flap in recirculation position for temperature under -10˚C, otherwise fresh air.
|
• |
Fan current 6 A.
|
• |
Manual selections can be made using all buttons except OFF, ECON or electrically heated rear window. If AUTO is pressed, the full display is shown.
|
The control module returns to normal operation as soon as B+ disappears from pin 3 or when the ignition is turned ON.
Adjusting |
Using the diagnostics tool, the ACC unit can be adjusted to:
• |
Air-mixing damper continually in the max heat position or automatic heat control.
|
• |
Select another fan current.
|
• |
Select for how long the air distribution damper remains in the defrost position before defrost/floor is selected.
|