Door window, CV
Door window, CV |
To remove |
1. |
Remove the door trim. See
Door trim, CV
.
|
2. |
Lower the window.
|
3. |
Remove the cover at the top rear corner of the door.
|
4. |
Remove the outer window well seal. The seal is secured by a clip at the rear end.
|
5. |
Remove the inner window well seal.
|
6. |
Fold down the water barrier.
|
7. |
Remove the clip and detach the window lift lever from the runner in the aluminium rail on the window.
|
8. |
Remove the bolts securing the window to the lift mechanism.
|
9. |
Lift the window out of the door. Hold the window lift mechanism away from the window to facilitate lifting.
|
To fit |
1. |
Raise the window lift mechanism.
|
2. |
Guide in the plastic bushings on the window into the rear window guide rail. Lower the window slightly and tighten the bolts that secure the window to the lift mechanism.
|
3. |
Fit the lift mechanism lever to the runner in the aluminium rail.
|
4. |
Fit the clip.
|
5. |
Adjust the door window. See
Adjusting the door and side windows, CV
.
|
6. |
Fit the water barrier.
|
7. |
Fit the inner window well seal.
|
8. |
Fit the outer window well seal. Fit the clip at the rear end.
|
9. |
Refit the cover at the top rear corner of the door.
|
10. |
Refit the door trim. See
To fit
.
|