Door window front seal, CV

/ 9-3 (9400) / 1998 / 8. Body / Glass, windows and mirrors / Adjustment/replacement / Door window front seal, CV

To remove

1.	Remove the door mirror.

2.	Remove the door trim.

3.	Remove the inner window seal.

4.	Loosen the outer window seal at the front edge.

5.	Remove the seal for the door mirror mounting.

To fit

1.	Affix the new seal at the point on the sheet metal flange. Use adhesive 30 08 075 3M Super Weatherstrip. Important Wipe dry the window channel before starting to apply adhesive.

2.	Press down the seal into the window channel.

3.	Raise the window and pull down the seal so that it seals around the front edge of the window.

4.	Bend up the seal and apply adhesive 30 08 075 3M Super Weatherstrip to the lower part.

5.	Fasten the seal with adhesive.

6.	Fit the inner and outer window seal on the door.

7.	Fit the door mirror.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.