Rear quarter light
Rear quarter light |
To remove |
1. |
Remove the weatherstrip from the C-pillar.
|
2. |
Remove the upholstery around the rear quarter light.
|
3. |
Remove the nuts that secure the window.
|
4. |
Attach a lifting handle to the outside of the window.
|
5. |
Get assistance from a co-worker. Press and pull out the side window. Cut the butyl tape sealing the side window with a knife as the window loosens. Be careful not to damage the paintwork or side window plastic embedment. Use safety glasses and work gloves.
|
To fit |
1. |
Remove the butyl tape from the body. If the old window is to be refitted, the butyl tape on the window must also be removed.
|
2. |
Apply new butyl tape to the side window as shown in the illustration. Use butyl tape part no. (45) 30 16 755.
|
3. |
Fit the window and tighten the nuts.
Tightening torque: 3 Nm (2.2 lbf ft) |
4. |
Refit the upholstery around the rear quarter light.
|
5. |
Refit the weatherstrip on the C-pillar.
|