SAAB WIS ONLINE

Windscreen seal, CV

Windscreen seal, CV

To remove


1. Remove the plugs from the windscreen frame seal.


2. Remove the bolts and remove the seal from the windscreen frame.


To fit



1. Start to fit from each corner.

2. Tighten down the seal.

3. Fit the plugs.

4. Pull off the protective backing from the double-backed tape and start to fit the seal at the bottom of the A-pillar and continue upwards to the corner.

5. Continue fitting from the centre at the top of the windscreen and out towards the edges. Use soapy water to facilitate fitting.

6. Check the fit against the front seal. If necessary adjust the front seal. See Adjusting seals .