Glove box
| Glove box |
| 1. |
Open the glove box. Open the cover and unscrew the retaining screws.
|
|
| 2. |
Remove the remaining retaining screws and mounting bolts as well as the expansion rivet at the front and release the snap fasteners from the bulkhead bracket.
|
|
| 3. |
Pull out the glove box and unplug the connector for the glove box illumination.
|
|
| 4. |
Lift out the glove box.
|
|
| To fit |
Fit in reverse order.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
