SAAB WIS ONLINE

Trim, B-pillar, 3D

Trim, B-pillar, 3D

To remove



1. Undo the front bolt on the slide rail and remove the belt.

2. Remove the air vent grille by unsnapping it from the inner B-pillar trim.

3. Remove the screw securing the inner B-pillar trim to the outer one.

4. Pull off the inner pillar trim (snap fasteners).

5. Remove the belt adjuster.

6. Remove the outer B-pillar trim (fastened with 2 clips).


To fit

Fit in reverse order.

Tightening torque:

Slide rail retaining bolt: 45 Nm (33 lbf ft)