Lamp body for direction indicators, mounting lugs
|
|
Lamp body for direction indicators, mounting lugs
|
|
1.
|
Identify the type of plastic See
or
|
|
2.
|
Select the appropriate welding wire and set the correct working temperature on the welding pistol so that it corresponds with the type of plastic. See
|
|
3.
|
Heat the end of the mounting lug and tack it on. Use the tacking tip.
|
|
4.
|
The mounting lug is now provisionally attached.
|
|
5.
|
Adjust the end of the welding rod so that it is thinner.
|
|
6.
|
Weld on the mounting lug with the welding rod.
|
|
7.
|
Allow the weld to cool.
|
|
8.
|
Sand down the welded joints as necessary.
|
|
9.
|
Remove shallow scratches by shock-heating the damaged area with the welding pistol, approx. 25°C above the welding temperature.
|
