Backrest upholstery, including child seat
| Backrest upholstery, including child seat |
| 1. |
Remove the 40 percent backrest,
.
|
|
| 2. |
Remove the 60 percent backrest,
.
|
|
| 3. |
Place the cushions on a workbench with protective covering.
|
|
| 4. |
40 percent backrest:
Remove the lock brace and the right-hand joint from the backrest.
60-percent backrest: Remove the left-hand joint. |
|
| 5. |
Detach the strip securing the upholstery to the rear section.
|
|
| 6. |
Remove the bottom of the child seat by unscrewing the seat joint.
|
|
| 7. |
Remove the head restraint by carefully lifting the upholstery with foam padding and pulling out the lock clips (one on each side).
|
|
| 8. |
Detach the T-strips securing the upholstery.
|
|
| To fit |
Fit in reverse order except for the lock clips securing the head restraint which should be pressed on first. When the upholstery and foam padding are in place, the upholstery will be guided to the correct position when the head restraint is fitted.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
