Emergency operation of the electrically adjustable seat
|
|
Emergency operation of the electrically adjustable seat
|
If the electric operation does not work, the seat can not be adjusted lengthwise so that it is possible to reach the retaining bolts. A tool must then be used to move the seat manually.
|
Emergency operation when removing electric seat
|
|
1.
|
Raise the seat to its highest position.
|
|
2.
|
Remove the seat side panel.
|
Note
|
|
Electrically adjustable seat:
The front bolt has a protector on its tip. Retain this protector as it must be fitted to the bolt to prevent it from chafing against electrical wiring.
|
|
|
3.
|
Remove the bevel gear, which drives the seat lengthwise, 2 Torx 30 screws. Hold the shaft protruding from the other side of the seat frame and pull out the gear.
|
|
4.
|
Dismantle the bevel gear, 2 or 3 Torx 20 screws.
|
|
5.
|
Press in the lock clip for the plastic bush and pull out the shaft. Wipe off grease from the dismantled shaft.
|
|
7.
|
Press a screwdriver, the largest possible, into the other end of the hose so that the screwdriver blade reaches the end of the shaft. Secure it with a hose clip as far from the screwdriver handle as possible.
|
|
8.
|
Fit the “tool” on the shaft and turn the screwdriver to operate the seat and access the retaining bolts.
|
Note
|
|
It is possible to move the seat by pressing forwards and backwards against the seat.
|
|
|
Emergency operation when fitting seat
|
|
Important
|
|
Note. The bevel gear must be fitted when the seat is in place but before the bolts are tightened to torque.
|
|
|
|
2.
|
Apply grease to the gear wheel and fit the shaft into the gear housing, making sure the shaft lock is positioned correctly.
|
|
3.
|
Put the cover in place and tighten the screws. Make sure the spring is positioned correctly.
|
|
4.
|
Hold on to the seat shaft and press the gear in place.
|
|
5.
|
Screw the gear to the seat base.
|
|
6.
|
Fit the front bolt in the lower seat panel. Fit the lower seat panel.
|
Important
|
|
Electrically adjustable seat:
Fit the protection on the front bolt.
|
|
|
|
|
7.
|
Continue to
fit
the seat.
|
