Motor and sensor, rear height adjustment
| Motor and sensor, rear height adjustment |
| 1. |
Remove the front seat from the car, see
.
|
|
| 2. |
Unplug the connector for the height adjustment motor.
|
|
| 3. |
Unscrew the motor, 2 screws and cable tie.
|
|
| 4. |
Lift the motor off the gear wheel.
|
|
| To fit |
Fit in reverse order.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
