Motors
| Motors |
The motors are controlled by the switches in the switch unit and are monitored by the PSM. When the motors are running, the control module detects the pulses from the Hall sensors which are used for programming. To change the direction of rotation of the motors, the polarity of the motor is reversed.
The following motors can be controlled from the switch unit:
| • |
electric motor (357Da) moves the seat forward or back
|
|
| • |
electric motor (357Db) raises or lowers the seat front
|
|
| • |
electric motor (357Dc) raises or lowers the seat rear
|
|
| • |
electric motor (357Dd) changes the backrest angle.
|
|
| Diagnostics |
If the motor will not allow adjustment either manually or via the memory settings, the following diagnostic trouble codes are generated (short-circuit to ground):
|
B2142
|
Motor, legroom adjustment
|
|
B2147
|
Motor, backrest
|
|
B2152
|
Motor, seat rear
|
|
B2157
|
Motor, seat front
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
