Slide mechanism, sunroof
Slide mechanism, sunroof |
1. |
Remove the glass hatch.
|
2. |
Pull the spring off the shaft.
|
3. |
Remove the retaining screw at the front so that the guide can be tilted forward, then push out the pin.
|
4. |
Remove the circlip for the rear pin and push out the pin.
|
To fit |
1. |
Fit the spring on the guide rail.
|
2. |
Insert the rear shaft and fit the circlip.
|
3. |
Insert the front shaft. Turn the shaft with cone end out.
|
4. |
Bend the rear guide and tighten the screw.
|
5. |
Refit the glass hatch.
|
Slide mechanism, adjustment of adjusting blocks |
1. |
Remove the glass hatch.
|
2. |
Loosen the screws that secure the adjusting blocks.
|
3. |
Adjust so that the blocks enter their grooves without touching them when the sunroof is opened.
|