Sunroof drive cable
Sunroof drive cable |
1. |
Remove the sunroof unit.
|
2. |
Remove the motor.
|
3. |
Remove the glass hatch.
|
4. |
Remove the rain gutter.
|
5. |
Remove the locking ring and fold out the spring.
|
6. |
Remove the retaining bolt from the cover at the rear, one cover strip on each side.
|
7. |
Move the holder for the rain gutter rearwards-downwards and remove them from the rail, one on each side.
|
8. |
Press down the catch at the rear of the slide mechanism and pull it rearwards.
|
9. |
Pull out the drive cable to the rear.
|
10. |
Remove the wire from the slide mechanism with a small screwdriver (snap-on fastener).
|
To fit |
1. |
Fit the drive cable to the slide mechanism.
|
2. |
Insert the slide mechanism with cable until it snaps into position.
|
3. |
Mount the holders for the rain gutter.
|
4. |
Mount the anti-vibration spring and lock ring.
|
5. |
Fasten the rear edge of the covers with some adhesive.
|
6. |
Fit the rain gutter.
|
7. |
Adjust the cables on both sides. Make sure that the rivet is halfway between the two marks in the link.
|
8. |
Refit the motor.
|
9. |
Refit the glass hatch.
|
10. |
Refit the sunroof unit.
|