30 17 787 Extrudable joint sealant/underseal
|
30 17 787 Extrudable joint sealant/underseal
|
Teroson Terostat 9320 T293. Grey, elastic, permanent-shape single component Extrudable joint sealant. Extrude with Multipress pistol. 310 ml cartridge.
See Service Manual.
1
No restrictions apply when transporting this product.
Material safety data sheet
|
1.
|
IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING
Product name
|
Terostat 9320 Grey (T293)
|
Application
|
"Factory finish" extrudable sealing compound
|
Manufacturer - supplier
|
Loctite Sweden AB
Automotive Aftermarket
P.O. Box 8823
SE-402 71 GÖTEBORG
Tel: +46 31 750 54 00
|
|
2.
|
COMPOSITION/INFORMATION ON INGREDIENTS
The product contains: silanes, plasticizers, organic solvent and filler.
Ingredient
|
CAS-no.
|
Content (%)
|
Hazard symbol/R-phrases
|
Remarks
|
Butylbenzylphthalate
|
85-68-7
|
10-30
|
N;R50/53
|
|
Naphtha (petroleum), desulphurized heavy
|
64742-82-1
|
5-10
|
R10 Xn;R65 R66 R67 N;R51/53
|
Benzene < 0.1%
|
(3-(2-aminoethyl)aminopropyl)trimethoxysilane
|
1760-24-3
|
1-5
|
Xi; R36
|
Benzene < 0.1%
|
Key
|
FB/FH/FM = Hazard code for fire/health/environment
T+ = Very toxic
T = Toxic
C = Corrosive
Xn = Harmful
Xi = Irritant
V = Moderately harmful
IK = Not subject to labelling
E = Explosive
O = Oxidizing
F+ = Extremely flammable
F = Highly flammable
N = Dangerous for the environment
|
|
3.
|
HAZARDS IDENTIFICATION
Adverse health effects
|
The product contains small quantities of solvents. During curing, the product gives off small amounts of methanol. High concentrations of the vapours can cause drowsiness and give rise to headaches, tiredness, dizziness and nausea.
|
Adverse environmental effects
|
The product contains butylbenzylphthalate which is very toxic to aquatic organisms and may cause long-term adverse effects in the aquatic environment.
|
|
4.
|
FIRST AID MEASURES
Inhalation
|
The person should rest in fresh air under supervision. In the event of discomfort, seek medical advice and take along this material safety data sheet.
|
Skin
|
Take off immediately all contaminated clothing, and wash the effected skin with soap and water.
|
Eyes
|
Rinse immediately with plenty of water for at least 15 minutes. Remove any contact lenses and keep the eyes wide open. If the irritation persists: Visit a hospital and present this material safety data sheet.
|
Ingestion
|
Rinse the mouth immediately and drink plenty of water, milk or cream. Keep the person under supervision. In case of discomfort, visit a hospital immediately and take along this material safety data sheet.
|
|
5.
|
FIRE-FIGHTING MEASURES
Suitable extinguishing media
|
Use a foam, carbon dioxide, powder or water mist extinguisher. If exposed to heat, cool with water and remove from the area of fire, if this is possible without entailing risk.
|
Specific hazards
|
Burning produces toxic vapours (CO, CO
2
).
|
Special protective equipment for firefighters
|
In the event of firefighting, use respiratory equipment with an air supply.
|
|
6.
|
SPILLAGE/ACCIDENTAL RELEASE MEASURES
Personal precautions
|
Ensure adequate ventilation. Avoid contact with skin and eyes. For personal protective equipment, refer to heading 8.
|
Environmental precautions
|
Avoid release into drains, the environment and the aquatic environment.
|
Methods for cleaning up
|
Scrape up spillage or remove with absorbent material. For disposal considerations, see point 13.
|
|
7.
|
HANDLING AND STORAGE
Advice for safe handling
|
Observe good chemical hygiene. Avoid contact with skin and eyes.
|
Technical measures
|
Use working methods that minimize contact.
|
Technical information
|
In case of unpleasant odours and work in confined areas, mechanical ventilation may be necessary.
|
Storage instructions
|
No special measures required.
|
Storage conditions
|
Must be stored in sealed original packaging at a temperature between 15°C and 25°C.
|
|
8.
|
EXPOSURE CONTROLS/PERSONAL PROTECTION
Technical measures
|
Efficient ventilation must be provided. Limits must not be exceeded and the risk of breathing vapours must be minimized.
|
Chemical identity
|
Limit
|
Type
|
Remarks
|
Ref.
|
Methanol
|
200ppm 250mg/m³
|
NGV
|
H
|
AFS 2000:3
|
Respiratory equipment
|
In case of insufficient ventilation: Use respiratory equipment with gas filter, type A2.
|
Hand protection
|
If there is a risk of contact: Wear protective gloves. See glove manufacturer's recommendations for suitable gloves.
|
Eye protection
|
If there is a risk of contact with eyes: Wear eye/face protection.
|
Skin protection:
|
No special measures required.
|
Hygiene measures:
|
Change soiled clothes.
|
|
9.
|
PHYSICAL AND CHEMICAL PROPERTIES
Form/state
|
Paste
|
Odour
|
Aromatic
|
Colour
|
Grey
|
Solubility in water
|
Insoluble
|
Flash point
|
28 °C
|
Relative density
|
1.45 g/cm
3
|
|
10.
|
STABILITY AND REACTIVITY
Stability
|
Stable at normal temperatures.
|
Conditions and material to avoid:
|
Heating.
|
Hazardous decomposition products
|
During curing, the product gives off small quantities of methanol.
|
|
11.
|
TOXICOLOGICAL INFORMATION
Inhalation
|
The product contains small quantities of solvents. During curing, the product gives off small amounts of methanol. High concentrations of the vapours can cause drowsiness and give rise to headaches, tiredness, dizziness and nausea.
|
Skin
|
Prolonged exposure may cause redness, irritation and dryness.
|
Eyes
|
May irritate and produce redness and stinging.
|
Ingestion
|
Unlikely due to form of product. Ingestion may however cause nausea, stomach pains and vomiting.
|
Prolonged exposure
|
The product contains small quantities of organic solvents. Frequent repeated inhalation, even of low concentrations, may lead to irritability, tiredness, memory loss and with time permanent damage to the nervous system, including the brain, and possibility even the liver and kidneys. In serious cases, methanol absorbed by the body can cause damage to the eyes.
|
|
12.
|
ECOLOGICAL INFORMATION
Mobility
|
The product is insoluble in water and produces a sediment in aquatic environments. The product contains volatile organic compounds (VOC) that evaporate rapidly from all surfaces.
|
Degradability
|
Degradability of product unknown.
|
Ecotoxicity
|
The product contains butylbenzylphthalate which is very toxic to aquatic organisms and may cause long-term adverse effects in the aquatic environment.
|
|
13.
|
DISPOSAL CONSIDERATIONS
Spilt product and waste should be disposed of in accordance with the regulations laid down by local authorities.
Surplus
|
Leave for controlled disposal, quoting EWC code 08 04 02.
|
Contaminated packaging
|
Treat contaminated packaging in the same way as surplus.
|
|
14.
|
TRANSPORT INFORMATION
UN-no.:
3077
|
Transport name:
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S (Butylbenzylphthalate)
|
Sea (IMDG)
|
Class:
9
EmS:
|
PG:
III
MFAG:
-
|
MP:
Yes
|
Inland waterways
|
To be handled locally.
|
Land (RID/ADR)
|
Class:
-
|
Substance number:
-
|
Letter:
-
|
Air (ICAO/IATA):
|
Class:
-
|
PG:
-
|
|
|
15.
|
REGULATORY INFORMATION
Labelling
|
Based on the information provided by the manufacturer regarding the chemical composition of the product, the Danish Toxicology Centre has judged that the product is not incorporated by the regulations of the Swedish National Chemicals Inspectorate on labelling, etc.
|
National regulations
|
European Directives 67/548/EEC relating to dangerous substances and 88/379/EC relating to dangerous preparations (up to and including the 26th adaptation). The National Chemicals Inspectorate's Chemical Products and Biotechnical Organisms Regulations KIFS 1998:8, with amendments. The National Chemicals Inspectorate's regulations accompanying the regulations (KIFS 1994:12) on the classification and labelling of chemical products, KIFS 1997:5 and KIFS 1999:3 with amendments. Provisions of the Swedish National Board of Occupational Safety and Health on occupational exposure limits, AFS 2000:3. Commission Decision of 20 December 1993 establishing a list of wastes pursuant to Article 1(a) of Council Directive 75/442/EEC on waste (94/3/EC). List of wastes pursuant to Article 1(a) of Council Directive 75/442/EEC on waste (EUROPEAN WASTES CATALOGUE).
|
|
16.
|
OTHER INFORMATION
The user must be given guidance as to appropriate working procedures and be acquainted with the contents of this material safety data sheet.
The information contained in this safety data sheet is based on the information that was available at the time of preparation of this safety data sheet and is provided under the assumption that the product is used under the specified conditions and in accordance with the working methods specified on the packaging or in the relevant technical literature. All other use of this product, such as in conjunction with other products or in different processes, is undertaken at the risk of the user.
Issued
|
2000-10-11 by
DANISH TOXICOLOGY CENTRE
Kogle Allé 2
DK-2970 HØrsholm, Denmark.
Tel: +45 45 76 20 55
Fax: +45 45 76 24 55
|
|