SAAB WIS ONLINE

Engine oil and oil filter

Engine oil and oil filter


Check for oil leakage

Check that no oil leakage occurs at the top or bottom of the engine and gearbox or in the power steering's hydraulic system.

Engine oil


Change the oil. Fill with oil to the MAX mark on the dipstick. The distance between the MAX and MIN marks corresponds to 1 litre (1,05 qts).

Check the level while the engine is still warm, 2-5 minutes after switching it off.

On certain diesel engines a label describing how to check the oil level is affixed to the dipstick.

Oil capacity

D223L: 5.5 litres (5.8 qts)

Oil type

See Lubricants

Tightening torque:

Drain plug

D223L: 18 Nm (13 lbf ft)

Check the oil level after changing engine oil and oil filter.

Warning

Make sure the filler cap is screwed on properly after topping up with oil. Oil on the exhaust manifold can cause fires.


Oil filter change



• Loosen the cover on the oil filter housing using a 36 mm socket and remove the filter.

• Replace the O-rings.


Tightening torque: 25.5 Nm (19 lbf ft).


• Start the engine and check the filter for leaks.