SAAB WIS ONLINE

Boost pressure control valve

Boost pressure control valve

To remove



1. Carefully lift up the sealing strip on the bulkhead partition.

2. Undo the control valve bracket and put it to one side.

3. Unplug the connector and vacuum hose on the control valve.

Important

Note the position of the hoses.


4. Remove the boost pressure control valve from the bracket.


To fit



1. Fit the boost pressure control valve onto the bracket.

Tightening torque 4 Nm (3 lbf ft).

2. Plug in the connector and connect the vacuum hoses in their previous positions.

3. Fit the control valve bracket to the bulkhead partition.

4. Put back the sealing strip.