Vacuum box, swirl throttle
|
|
Vacuum box, swirl throttle
|
|
1.
|
Remove the engine cover.
|
|
2.
|
Detach the vacuum hose from the vacuum box.
|
|
3.
|
Undo the vacuum box bracket and turn the control arm until the groove and the recess are aligned.
|
|
4.
|
Remove the vacuum box from the bracket by turning it slightly anti-clockwise.
|
|
1.
|
Fit the vacuum box on the bracket by pressing in the vacuum box and turning it slightly clockwise.
|
|
2.
|
Lubricate the control arm pin and turn the control arm until the groove and the recess are aligned and fit the vacuum box to the intake manifold.
Tightening torque 8 Nm (6 lbf ft).
|
|
3.
|
Connect the vacuum hose to the vacuum box.
|
|
4.
|
Put back the engine cover.
|
