P0195, P0196
Read the instructions below then
start the fault diagnostic procedure.
Symptom: No symptoms.
P0195
Oil Temperature. Open Circuit / Short to B+.
P0196
Oil Temperature. Short to Ground.
Fault symptom
Conditions
The following conditions apply for the DTC in question:
•
|
P0195:
Voltage on control module sensor input exceeds 4.7 V for 0.6 seconds.
|
•
|
P0196:
Voltage on control module sensor input drops below 0.3 V for 0.6 seconds.
|
Diagnostic help
P0195:
The control module uses 100°C (212°F) as a substitute value. The reading on the diagnostic tool is -50°C (-58°F). If P0115, P0120 and P0195 are present in the control module then the lead to pin 93 is shorted to B+. The short can be located anywhere in the circuit.
P0196:
The control module uses 100°C (212°F) as a substitute value. The reading on the diagnostic tool is 200°C (392°F).