P1626
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Check Engine on when ignition switch next turned on.
Main Relay Circuit. Voltage drops to late
Fault symptom
•
|
Check Engine on when ignition switch next turned on.
|
Conditions
The following conditions apply for the DTC in question:
•
|
A check of the main relay circuit is performed in the afterrun function. When the control module stops grounding pin 58 to the main relay, a clock starts. If it takes longer than two seconds for the current to disappear from pin 3 after the grounding has ceased, the diagnostic trouble code will be generated the next time the ignition is turned on.
|
Diagnostic help
The diagnostic trouble code can be generated if the relay coil ground lead is shorted to ground or if the main relay circuit is shorted to B+.