Evap canister purge valve (B235R)
| Evap canister purge valve (B235R) |
| Dismantling |
| 1. |
Unplug the connector from the evap canister purge valve. Note the positioning of the purge valve.
|
|
| 2. |
Remove the valve from the holder.
|
|
| 3. |
Detach the hoses.
|
|
| To fit |
| Note | ||
|
Spray the connector with Kontakt 61 (part no. 30 04 520). |
| 1. |
Fit the hoses.
|
|
| 2. |
Fit the valve to the holder.
|
|
| 3. |
Plug the connector into the evap canister purge valve.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
