Evaporative emission canister
| Evaporative emission canister |
| 1. |
Raise the car and remove the front right wheel.
|
|
| 2. |
Remove the wing liner.
|
|
| 3. |
Detach the hoses and make a note of their positions.
|
|
| 4. |
Unhook the evaporative emission canister.
|
|
| To fit |
| 1. |
Hook the evaporative emission canister in place.
|
|
| 2. |
Refit the hoses in their correct positions.
|
||||||||||
| 3. |
Fit the wing liner and wheel.
Tightening torques: Wheel: 120 Nm (89 lbf ft) |
|
| 4. |
Lower the car to the floor.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
